home *** CD-ROM | disk | FTP | other *** search
- Path: nntp.pinc.com!usenet
- From: addyer@pinc.com (A. Douglas Dyer)
- Newsgroups: comp.sys.amiga.hardware
- Subject: Re: Monitor problem
- Date: 15 Feb 1996 10:13:59 GMT
- Organization: Pacific InterConnect
- Message-ID: <893.6619T68T24@pinc.com>
- References: <150377@cup.portal.com>
- NNTP-Posting-Host: sella.pinc.com
- X-Newsreader: THOR 2.22 (Amiga;TCP/IP)
-
-
- >When I start it up the monitor is fuzzy, lots of snow. After
- >about 10 minutes or so, this clears up with a proper picture.
-
- >Does anyone know the cause and the fix?
-
- Hello David. I too have a A3000, and if I have not used my computer
- for more than a few weeks, I will notice a deterioration im my screen
- image, with letters appearing to have the jitters especially when the
- hard drive is active. I cleared this up by adjusting the Display
- enhancer fine tuning control located on the back of the computer next
- to the Enable/Disable Mode switch. Range of turning is suggested to be
- between one and 15 turns. See the instruction manual introducing
- Commodore A3000 on page C-6. This will correct pixel jitters. The
- coarse tuning control is not user adjustable and needs an authorized
- service center.
-
- Hope that helps.
-
- --
- addyer@pinc.com | Doug Dyer
- | Victoria, B.C. CANADA
-
-
-